White wraps can look flat and lifeless under artificial lighting. TeckWrap’s Frosted Pearl does not. It maintains its soft ceramic-pearl shift and icy gloss under showroom lighting, streetlights, and direct sunlight.
Key Attributes
Icy pearl core: A clean white base carries a subtle ceramic-pearl depth that stays cool and refined without appearing chalky or flat.
Gloss with a soft hand: Polymeric multilayered hybrid film creates smooth reflections with noticeable color depth.
Air-release architecture: Built-in air-release channels help release trapped air during installation, allowing the film to lay flat without bubbling.
Weatherproof bond: Henkel solvent-based acrylic adhesive withstands rain, UV exposure, and temperature changes without peeling or cracking.
Pearl follows the panel: The heat-conformable film works around curves, mirrors, edges, and moderate recessed areas while maintaining its finish.
Paint-safe removal: The adhesive removes cleanly without leaving residue or damaging the factory clear coat underneath.
Frosted Pearl does not sparkle; it glows. As you move around the vehicle, the pearl effect shifts smoothly and evenly across the surface, creating more of a soft mist than visible glitter. Under direct light, the finish reveals an icy shift across curved panels. In the shade, it settles into a clean ceramic white rather than appearing grey.
Placed beside a standard pearl white, Frosted Pearl looks quieter and cooler, with a finish that is closer to a modern factory multi-coat appearance.
OEM MATCH
Closest to Lexus Sonic Quartz.
Shares the cool undertone of BMW Mineral White.
Softer in appearance than Mercedes Designo Diamond White.
Offers a deeper ceramic finish than Porsche Carrara White Metallic.
These factory colors were never offered on the Lucid Air or Polestar 3. Frosted Pearl brings this cool ceramic-white character to the full vehicle body.
Features
Film Construction
Film Type: Premium polymeric hybrid with air-release channels and color-shift finish
Film Thickness: 0.15 mm
Release Liner Thickness: 0.03 mm
Backing Liner Thickness: 0.11 mm
Total Thickness (with liner): 0.29 mm
Liner: PE-coated Kraft with air-release (ISO 9001, ISO 14001, OHSAS 18001)
Adhesive: Henkel solvent-based acrylic, ultra-weather-resistant, viscosity 1000–3000 cps, 12 µm dry
Finish: Gloss Color Shift Frosted Pearl, directional
Roll Width: 152 cm (5 ft)
Full Roll Length: 18 m
Roll Weight: 14 kg
Performance
Breaking Strength: 25.7 N/10mm avg. (ASTM D3759)
Peel Strength (180°): 8.4 N/10mm avg. (ASTM D3330)
Dimensional Stability: Less than 2% shrinkage
Plastification: 23%–32%
UV Resistance: 4–5 Pass (ASTM D4329-13 Cycle A, ISO 105-A02)
UV Test Conditions: UVA-340, 8h UV at 60°C + 4h condensation at 50°C, 48h
Storage Shelf Life: 2 years at +10°C to +20°C, 50% RH, in dry conditions and away from sunlight
Warranty
Standard TeckWrap limited warranty applies. Scratches are not covered. Use the same production LOT to maintain consistent color across panels.
Application
Application Temperature: +17°C to +23°C
Service Range: -45°C to +45°C
Installation Tool: Standard squeegee with soft buffer
Conformability: Smooth and medium-curved surfaces
Post-Heat: 100°C
Cure Time: 48 hours
Overlap: 3–4 mm
Film Direction: Directional; check orientation before cutting
Protective Cap: Remove before installation
Disclaimer
All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. Products are sold with the understanding that the buyer has independently determined the suitability of the products for their intended purpose.
TeckWrap products are warranted to be free from material defects for the duration of the stated shelf life. In the event of a defect, TeckWrap will replace the product or provide compensation at its sole discretion. This constitutes the exclusive obligation of TeckWrap Inc.
The warranty does not cover normal wear, transportation, labor, or consequential damages.
