Orange wraps generally fall into one of two categories. They can either appear too bright, or they can lose their warmth as the lighting changes. Copper Orange sits somewhere in between. It delivers the richness of copper without appearing brown, while the satin finish keeps the color looking natural rather than excessively glossy.
Key Attributes
Balanced copper tone: Warm orange combined with fine metallic flake creates a rich appearance without becoming too bold.
Soft satin finish: Reduces strong reflections so the color stands out instead of the glare.
Henkel adhesive: Transparent solvent acrylic adhesive withstands heat, rain, and everyday weather conditions, while allowing clean removal when needed.
Straightforward installation: Premium PET release liner keeps the film flat, helping make installation easier.
Works around curves: Softens with heat and conforms around mirrors, bumpers, door handles, and moderate recessed areas.
Paint-safe removal: Removable adhesive helps maintain the condition of the factory finish underneath.
Built for daily use: UV-resistant film helps the color remain consistent through changing seasons.
Copper Orange does not look exactly the same throughout the entire day. In the morning, it appears slightly closer to copper. As the sun rises higher, the metallic effect becomes more noticeable and the orange feels warmer without shifting toward yellow. On cloudy days, it continues to retain its copper appearance instead of moving toward brown like many darker orange shades. The satin finish helps control reflections, allowing you to focus more on the color itself rather than whatever is reflected across the bodywork.
OEM Match
Closest to: Porsche Papaya Metallic
Same warmth as: Bentley Orange Flame Metallic
Similar copper tone to: McLaren Tarocco Orange
Less aggressive than: Lamborghini Arancio Xanto
Deeper than: BMW Fire Orange
If you have always liked the appearance of Porsche Papaya Metallic or Bentley Orange Flame Metallic, Copper Orange offers a similar direction without directly copying either color. Now get it on your Supra, Mustang, C63, M4, or Model Y.
Features
Film Construction
Film Type: Pressure-sensitive high-grade polymeric with air-release channels
Film Thickness: 0.14 mm
Backing Liner Thickness: 0.14 mm
Total Thickness (with liner): 0.28 mm
Liner: Double-sided PE-coated Kraft, solventless silicone coating, air-release (ISO 9001, ISO 14001, OHSAS 18001)
Adhesive: Henkel solvent-based acrylic, transparent, viscosity 1000–3000 cps, 12 µm dry
Finish: Satin metallic, directional
Roll Width: 5 ft (1.52 m)
Full Roll Length: 59 ft (18 m)
Performance
Service range: -30°C to +30°C
Tensile strength: MD 29.5 / CD 24.8 N/mm² (ASTM D882-02)
Elongation at break: MD 206.8 / CD 196.4 (ASTM D882-02)
Dimensional stability: 2% shrinkage at 70°C (ASTM D1204-02)
Surface tension: 34 dynes/cm (ASTM D2578-04a)
Storage: 2 years at +10°C to +20°C, 50% RH, dry conditions
Warranty
Designed for long-term outdoor use, providing up to 3 years of outdoor durability on vertical panels and approximately 2 years across a full wrap, depending on the climate zone. Heat-removable, with minimal adhesive residue when removed within the recommended three years.
Application
Apply at +17°C to +23°C
Tools: squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IR thermometer
Conformability: smooth and medium-curved surfaces
Post-heat: 85°C
Cure: 24 hrs above 10°C (48 hrs at room temperature recommended)
Overlap: 3–4 mm
Directional film, check orientation before cutting
Avoid overstretching during application
Remove the protective cap before installing
Aftercare: pH-neutral products only, avoid waxes and harsh solvents
Disclaimer
All TeckWrap statements, technical information, and recommendations are based on tests believed to be reliable but do not constitute a guarantee or warranty. All products are sold with the understanding that the buyer has independently determined the suitability of the products for their purpose.
TeckWrap products are warranted to be free of defects in materials for the shelf life period. In case of defects, TeckWrap will replace the product or compensate at its sole discretion. This is the exclusive obligation of TeckWrap Inc.
Warranty does not cover normal wear, transportation, labor, or consequential damages.
Screen images may vary; refer to physical color swatches. Use the same production LOT for color consistency. Film must be stored without the protective layer to prevent tunneling. Scratches during application or daily use are not covered.
