X75M Shade Paint Protection Film X75M Shade

TeckWrap Clear X75M Shade is a gloss clear paint protection film built on aliphatic TPU (Lubrizol ESTANE®) with a Lotus Effect hydrophobic top coat. At 262 µm total thickness with a 187 µm application layer, X75M Shade delivers reliable PPF-grade defense against stone chips, scratches, splatter, and minor abrasions while keeping the install layer thick where it matters most for impact absorption.

The Lotus Effect top coat repels water, dirt, and contaminants for easier maintenance. The self-healing surface reflows light scratches with heat. In accelerated weathering tests equivalent to 9 years, ESTANE® TPU maintained appearance and physical performance.

For value-conscious buyers who want strong impact protection on a tighter budget, partial-coverage installs, and shops looking for a reliable everyday clear PPF. Backed by TeckWrap's decade of paint protection film manufacturing experience and worldwide installer network.

Features:

Film construction

• Film: Aliphatic TPU, Lubrizol ESTANE® base, gloss finish

• Top coat: Lotus Effect, solvent-resistant, stain-resistant, scratch-resistant, self-healing (TORAY)

• Total thickness: 262 ± 10 µm

• Application layer: 187 ± 10 µm

• Peel adhesion: ~1500 g/inch

• Light transmission: 85% (clear gloss optical class)

• Roll size: 1.52 m × 15 m

Performance

• Tensile strength: ≥16 MPa

• Product elongation at break: 300%

• Coating elongation at break: ≥100%

• UV resistance: ≥90%

• Maximum temperature: 100°C

• Self-healing surface (minor scratches recover with heat)

• Weathering tested equivalent to 9 years (ESTANE® TPU base)

Warranty

4-year warranty from production date. Scratches beyond self-healing range and impact damage not covered.

Application:

• Apply at +17°C to +23°C

• Wet application with slip and tack solutions

• Tools: squeegee with soft buffer, heat gun, knife, microfiber

• Conformability: complex curves, hoods, fenders, bumpers, mirrors, full body panels

• Adhesive cures fully at room temperature within 1 week

• Cure: 24–48 hours before water exposure

• Avoid waxing or pressure-washing for the first 7 days

• Surface must be thoroughly cleaned and decontaminated before install

Disclaimer:

TeckWrap products are warranted to be free of material defects for the warranty period. In case of defects, TeckWrap will replace or compensate at its sole discretion. Warranty does not cover normal wear, labor, transportation, improper installation, physical impact damage, or scratches beyond the self-healing range.

Use same production LOT for consistency across panels.