X85 Essential Paint Protection Film X85 Essential

TeckWrap Clear X85 Essential is a gloss clear paint protection film built on aliphatic TPU (Lubrizol ESTANE®) with a Lotus Effect hydrophobic top coat. At 330 µm total thickness with a 208 µm application layer, X85 Essential delivers stronger impact absorption than thinner clear PPFs, making it a solid all-rounder for daily-driver protection.

The Lotus Effect top coat repels water, dirt, and contaminants for easier maintenance. Higher tensile strength (21 MPa) and 380% elongation give it clean stretch over curves and stronger impact resistance. The self-healing surface reflows light scratches with heat.

For everyday daily drivers, family vehicles, partial-coverage installs, and owners who want a thicker, harder-working clear PPF without paying premium tier prices. Backed by TeckWrap's decade of paint protection film manufacturing experience and worldwide installer network.

Features:

Film construction

• Film: Aliphatic TPU, Lubrizol ESTANE® base, gloss finish

• Top coat: Lotus Effect, solvent-resistant, stain-resistant, scratch-resistant, self-healing (TORAY)

• Total thickness: 330 ± 10 µm

• Application layer: 208 ± 5 µm

• Peel adhesion: ~1500 g/inch

• Light transmission: 90% (clear gloss optical class)

• Roll size: 1.52 m × 15 m

Performance

• Tensile strength: 21 MPa

• Product elongation at break: ≥380%

• Coating elongation at break: ~150%

• UV resistance: ≥95%

• Maximum temperature: 100°C

• Self-healing surface (minor scratches recover with heat)

• Weathering tested equivalent to 9 years (ESTANE® TPU base)

Warranty

4-year warranty from production date. Scratches beyond self-healing range and impact damage not covered.

Application:

• Apply at +17°C to +23°C

• Wet application with slip and tack solutions

• Tools: squeegee with soft buffer, heat gun, knife, microfiber

• Conformability: complex curves, hoods, fenders, bumpers, mirrors, full body panels

• Thicker construction may require more squeegee pressure on tight curves

• Adhesive cures fully at room temperature within 1 week

• Cure: 24–48 hours before water exposure

• Avoid waxing or pressure-washing for the first 7 days

• Surface must be thoroughly cleaned and decontaminated before install

Disclaimer:

TeckWrap products are warranted to be free of material defects for the warranty period. In case of defects, TeckWrap will replace or compensate at its sole discretion. Warranty does not cover normal wear, labor, transportation, improper installation, physical impact damage, or scratches beyond the self-healing range.

Use same production LOT for consistency across panels.